How To Clean Intex Inflatable Pool. Get the gear, make that water clear. Ensure that the soap you use is mild.
This forum is focused on portable tubs which are what the large acrylic, plastic and roto molded tub are considered. Open the air release valve on the top of the cover to release air from inside of the pump. Drain all the water using the plug and the garden hose.
Most Inflatable Pools Have A Drain Plug Near The Bottom Of The Pool, If Yours Doesn’t, You May Need To Deflate The Pool A Bit To Let The Water Drain Out.
Baking soda should be 1.5 lbs for every 10,000 gallons of water. Clean with hose and scrub brush. You can try holding a trichlor puck on an area of the stain for a few minutes.
Use 55% To 62% Chlorine To Kill Those Dangerous Monsters Lurking Inside The Pool.
Drain all the water using the plug and the garden hose. Get the gear, make that water clear. The traditional method of vacuuming a pool, intex vac hose and vac heads are 1.25″ diameter, but connect to a standard pool pole.
In Order To Clean Your Your Inflatable Or Intex Pool, You’re Going To Want To Have A Few Items Handy:
By connecting the hose to an air pump and running it through the inflatable pool, you can suck up any dirt or debris that may be on the bottom of it. Some people do this weekly, others check every few weeks. Set up your garden hose to an area where you want the drained pool water to go.
Remove The Cap In Your Intex Framed Pool Set.
Wait for the air to stop hissing out. Then use your pool vacuum to suck up anything loose. Open the air release valve on the top of the cover to release air from inside of the pump.
This Forum Is Focused On Portable Tubs Which Are What The Large Acrylic, Plastic And Roto Molded Tub Are Considered.
Just mix the soap with water in a bucket of about 0.5 gallons of each or put it directly on the floor of your pool for mild suds. Check these regularly to wash away any debris that has accumulated in them. The recommendable ph for the pool is 7.2 to 7.4.